Apartment Bunk Beds
CONTENTS
DESIGN FOR TOMORROW
Design Description
Product design description
Product Introduction
JY-B128
JY-B129
JY-B128
Healthy, Environmental-friendly
This product is made of high-quality cold-rolled steel plate and rolled by a special molding line. Its elevation is hollow and heterogeneous. The front and side of the column are reinforced with ribs. There are anti-slip patterns on the pedals to prevent slipping. Reliably and silently, the stability is very strong, and the safety is greatly guaranteed.
Design Description
Using high-quality steel, reinforced rib structure, comfortable color matching, while meeting the needs of children’s rapid growth.
Upright
It is made of cold-rolled steel plate rolled by a special molding line. Its elevation is hollow and heterogeneous. The front and side of the column are reinforced with ribs. The material thickness is 1.2mm (national standard).
Beam
It is made of cold-rolled steel plate rolled by a special molding line. Its façade is hollow and has two reinforcing ribs. The material thickness is 1.2mm (national standard).
Plank
It adopts two-sided smooth surface and solid wood paving with a thickness of 12mm. (Sheet: Chinese fir)
Bed guardrail
The guardrail support frame is formed by one-step punching of high-strength carbon steel, and the inner side is sealed with an engineering plastic cover. The engineering plastic cover has a permanent warning line formed at one time. The bottom of the guardrail is equipped with a 12mm thick solid wood panel, the guardrail support frame and the bed beam Welding and fixing.
Ladder steel frame
It is a square tube, the upper end of the steel frame is bent to a certain arc, which can be used as a handrail, and the lower end has a certain slope, which is convenient for climbing up and down the ladder. The connection between the ladder and the bed hall is equipped with a plastic sleeve, which is more reinforced
For the stability of the ladder, the use of a plastic protective cover can also minimize the noise generated by the product during use, and achieve the purpose of invisible installation (that is, the connecting screw is not exposed), and it is more beautiful.
Ladder foot pad
The high-quality Sinopec high-density polyethylene material is used to reduce the noise caused by friction caused by the contact between the ladder and the ground, and at the same time prevent the ground from scratching, and is beautiful and durable to increase safety.
Stair step
The surface layer is designed with five anti-skid strips and two non-slip round holes with symmetrical grooves, which not only play a role of anti-slip, but also increase the aesthetics and increase the strength. There are 2 screws on the back.
The mounting position and a groove are used to install steel pipes, and the stability is increased; the stair steps are hollow blow molded by large blow molding equipment (the raw material is Sinopec high-density polyethylene), and the material is environmentally friendly,
It is harmless to human health, high hardness, strong toughness, surface high wear resistance, scratch resistance, stain resistance and easy cleaning, insulation, heat and cold resistance, aging resistance, pressure impact resistance; hollow blow molding has micro-elasticity
Toughness, increase the comfort of walking contact.
